Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Features
Front Panel
2
4
1
3
1.
Bluetooth Signal LED: This LED will illuminate green when the Bluetooth signal
exceeds -40 dBFS.
2.
Input Level Knob: Turn this knob to adjust the input signal level for the
individual Bluetooth channels.
3.
Pairing LED: This LED flashes when the Pair button is pressed and held for 3
seconds and is lit solid when paired to a Bluetooth source.
4.
Pair Button: Press and hold this button for 3 seconds to pair to a Bluetooth
source. Press and hold this button for 3 seconds to disconnect from a
1
Bluetooth source.
5.
Computer Signal LED: This LED will illuminate green when the computer USB
signal exceeds -40 dBFS.
6.
Computer Level Knob: Turn this knob to adjust the level for the computer USB
playback or the 1/8" (3.5 mm) TRS input.
7.
Listen To Knob: Turn this knob to select which input signal (Bluetooth A, B, C,
or Computer) is sent to the Master output and Amplifier output.
8.
Mix LED: This LED illuminates yellow when Mix mode is selected.
9.
Mix Button: Depress this button to monitor a blend of the Bluetooth A, B, C,
and Computer sources.
10. Low EQ: Adjust this knob to increase or decrease the low (bass) frequencies
for all signals.
11. High EQ: Adjust this knob to increase or decrease the high (treble) frequencies
for all signals.
12. Signal LED: This LED illuminates green when the master volume exceeds -40
dBFS, illuminates yellow when the signal exceeds -10 dBFS, and illuminates
red when the signal exceeds 0 dBFS. When the LED illuminates red, reduce the
Input Level knob settings to prevent "clipping" and distortion.
13. Master Volume Knob: Turn this knob to increase or decrease the signal level
sent to the Master output, Amplifier output, and USB port.
14. Power LED: This LED illuminates yellow when the unit is powered on.
2
2
4
1
3
1
3
2
3 4
6 7
4
5
8
5
6
10
10
13
13
9
11 12
11
12
7
14
14
7
Publicidad
Tabla de contenido
