General Description - Gewiss Chorus GW 10 766 Manual De Usuario

The 1 channel 16 A Easy Actuator - flush-mounted, allows you to activate/deactivate 1
electrical charge using 1 16 A relay fitted with 1 output exchange contact (1 NO/NC).
The relay switching command can be given by Home Automation control or sensor
devices using the KNX/EIB bus, or they can be generated locally using the front button.
The actuator is powered by the bus line and is fitted with a green LED which indicates
the output status. This device sends to the bus information on the relay status (ON = NO
contact closed, OFF = NO contact open) at the ignition, at the reception of a command
and when it is commanded via the local button.
The actuator foresees the ON/OFF command for the load, the execution of timer
commands, scene management and the implementation of priority controls to override
the output status.
The various operating methods can be used simultaneously.
This means, for instance, that the device can turn a light on or off, or turn it on or off
automatically after a set time has elapsed according to the command received.
The device is fitted inside a standard flush-mounted box, mounted on Chorus supports
in the space of two modules.
The actuator can be configured with the Easy controller to perform one of the following
functions:
ACTIVATING AND DEACTIVATING CHARGES
The actuator channel activates or deactivates the electric charge when it receives ON/OFF
commands sent, for example, by a contacts interface or a button pad configured in
ON/OFF Cyclic switching or Edge management mode.
The green LED comes on to indicate that the relay contact is closed.
GENER L DESCRIPTION
Summary
Functions
17
E
N
G
L
I
S
H