Applications; General Safety Information; Preparation - Rotwerk RB 14 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 46
Chucking capacity
Motor data

APPLICATIONS

The benchtop drilling machine RB 14 is
designed for drilling through metal, plastic,
wood and similar materials. The machine
must not be used to process foodstuffs
or health-endangering materials. The drill
chuck is designed only for use of drills and
tools with a cylindrical shaft diameter of 1
to 13 mm. The machine is intended to be
used by adults.
The machine may only be used
for the type of work specified, and
in conjunction with the materials
cited. ROTWERK can accept no
liability for loss or damage arising
from any other unauthorised use.
Furthermore, such unauthorised
use would also void any warranty
claim.

GENERAL SAFETY INFORMATION

• This device is not suitable for use by per-
sons (including children) with restricted
physical, sensory or mental abilities, or
without experience in and/or knowledge
of the device; unless they are super-
vised by, or receive training in the op-
eration of the device from, an individual
who is responsible for their safety.
• Children must be supervised to ensure
that they do not play with the device.
• Never allow the device to be used by
children or other persons who are not
familiar with the operating instructions.
The minimum age for the operator of
the device may be determined by local
regulations.
When using power tools, the fol-
lowing fundamental safety precau-
tions must be taken in order to pro-
tect against electric shock and the
risk of injury or fire:

PREPARATION

• Be aware of other people!
• Never use the device if there are
persons or animals in the vicinity of the
device.
• Wear safety goggles and ear protec-
tion!
Protect your eyes against flying parts
and chips. Wear ear protection and
safety goggles at all times during opera-
tion.
• Wear suitable work clothing!
Always wear safety gloves when work-
ing with sharp-edged workpieces.
Wear tight-fitting clothing. Do not wear
loose-fitting clothing or clothing with
belts or cords that hang down. They
could become caught in rotating parts
and cause severe injury.
• Wear a hair net or hat
If you have long hair, wear a hair net or a
hat that fully covers your hair. Long hair
could become caught in rotating parts
and cause severe injury.
GB
DE
17

Publicidad

Tabla de contenido
loading

Tabla de contenido