About The Controls On The Air Conditioner; Remote Control; Controls - GE AHH08 Manual Del Propietario E Instrucciones De Instalación

About the controls on the air conditioner

Features and appearance will vary.
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
NOTE: The display always
shows the room temperature
except when setting the Set
temperature or the Delay
timer.
Air Conditioner Controls

Controls

Power Pad
Turns air conditioner on and off. When turned
on, the display will show the room temperature.
Display
Shows the room temperature or time remaining
on the Delay timer. Shows the Set temperature
while setting the temperature in Cool or Energy
Saver modes. The Set light will turn on while
setting.
Temp and Delay Increase
Pads
Use to set temperature or delay time.
Temperature can be set in Cool, Energy Saving
and Auto mode.
Mode Pad
Use to set the air conditioner to Fan Only, Cool,
Energy Saver or Auto mode.
Fan Speed Pads
Use to set the fan speed to Low, Med, or High
on the unit.
4
°F/°C
Hr
Fan
On
High
Only
Off
Cool Med
Energy
Low
Saver
Auto
Temp / Delay
/Decrease
Unit power
on/off
Mode select
Fan speed
Delay 1–24hr
Temperature
set/Delay Timer
Increase and Temp / Delay
Decrease

Remote Control

Delay Pad
Delay ON When the air conditioner is off, it can
be set to automatically come on in 1 to 24 hours
at its previous mode and fan settings.
Delay OFF When the air conditioner is on,
it can be set to automatically turn off in 1 to
24 hours.
How to set:
Press the Delay 1–24hr pad on the unit or the
remote control. Each touch of the Increase
Decrease pads on the unit or the Increase
–
Decrease pads on the remote control will set
the timer in 1-hour intervals.
To review the remaining time on the Delay
1–24hr timer, press the Delay 1–24hr pad on the
unit or the remote control. Use the Increase
Decrease pads on the unit or the Increase
–
/ Decrease pads on the remote control to set
a new time if desired.
To cancel the timer, press the Delay 1–24hr pad
until the light on the Delay 1–24hr pad goes off.
/
+
/
/
+