About The Controls On The Air Conditioner; Remote Control; Operating Instructions - GE AED10 Manual Del Propietário

About the controls on the air conditioner

Features and appearance will vary.
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
Power
On/Off
Auto
High
Med
Low
Fan
NOTE: The display always shows the room temperature except
when setting the set temperature.
Controls
Power Pad
Turns air conditioner on and off. When turned
on, the display will show the room temperature.
Display
Shows the room temperature or time remaining
on the Delay timer. Shows the Set temperature
while setting the temperature in Cool or Energy
Saver modes. The Set light will turn on while
setting.
Temp Increase
Use to set temperature when in Cool or Energy
Saver mode. The Set light will turn on while
setting.
Fan Speed Pads
Use to set the fan speed to Low, Med, High
or Auto on the unit. NOTE: On the remote
control, use the fan speed Increase
–
Decrease pads to set the fan speeds to Low,
Med or High. Use the Auto pad to turn Auto
fan on.
Note: The default temperature reading on the display is degree Fahrenheit ( °F). To change the display to
degree Celcius (°C), press the Temp Increase
seconds. Repeat the process to change back to degree Fahrenheit (°F)
4
Light indicates the unit is in
the temperature set mode.
Set
Cool
Fan Only
Energy Saver
Reset
WiFi
Mode
Filter Connect
Air Conditioner Controls
/Decrease Pads
+
/
Light indicates
WiFi connection
+
-
Mode select
Fan speed
Decrease
Temperature
set Increase
and Decrease
Mode Pad
Use to set the air conditioner to Cool, Energy
Saver or Fan Only mode.
WiFI Connect
Enables connection of the air conditioner to
the home WiFi. Download App for details at
www.GEAppliances.com/connect.
Reset Filter
LED will turn on when fan has accumulated 250
hours of run time as a reminder to clean filter.
Press Reset Filter to turn off the LED and reset
the accumulated run time.
and Temp Decrease
Fan

Remote Control

buttons together and hold for 3
Auto Fan
on
Fan speed
Fan
Increase
Unit power
on/off