RIDGID KJ-1590II Manual De Instrucciones página 5

KJ-1590 II, KJ-2000, KJ-3000
Jetter Nozzle Selection*
Features three reverse jet thrusts for maximum
propulsion to jet long distances.
Use this nozzle for most applications.
Uses three jet thrusters in reverse plus one jet pointed
forward to penetrate solid grease or sludge blockages.
The forward jet blasts a small hole in the blockage for
the nozzle to follow. Very eff ective when jetting ice
blockages.
Use the drop head nozzle to help negotiate diffi cult
bends. This nozzle has three reverse jet thrusts.
Jetter Hose Suggestion Chart*
KJ-1590 II and KJ-2200
Applications
Bathroom sinks, urinals and small lines
Kitchen sinks, laundry tubs and stacks,
clean-outs and vents
Shower and fl oor drains, lateral lines
and grease traps
Lateral and main lines
KJ-3000
Applications
Kitchen sinks, laundry tubs and stacks,
clean-outs and vents
Shower and fl oor drains, lateral lines
and grease traps
Lateral and main lines
* The outside diameter is mentioned on the hose.
4
KJ-2200 KJ-2200 KJ-1590 II KJ-3000 KJ-1590 II KJ-3000
Thread size ¼" NPT
Hose size
Hose inside diameter
64787
(H-71)
64792
(H-72)
Pipe size
32 - 51 mm
51 - 77 mm
77 - 100 mm
100 - 150 mm
Pipe size
51 - 77 mm
77 - 100 mm
100 - 150 mm
Ridge Tool Company
1/8" NPT
½" 1/8" & ¼"
¼" 1/8" & 3/16"
64772 64802
(H-61) (H-81)
64777 64807
(H-62) (H-82)
64782 64812
(H-64) (H-84)
Nozzle size
1/8" NPT
1/8" NPT
¼" NPT
¼" NPT
Nozzle size
1/8" NPT
¼" NPT
¼" NPT
¼" NPT ¼" NPT
½" 3/8"
¼" 3/8"
64802 58436 64817
(H-81) (H-91)
64807 58446 64822
(H-82) (H-92)
64812
(H-84)
Hose size Hose ID
3/16" 1/8"
¼" 3/16"
½" ¼"
½" ¼"
Hose size Hose ID
¼" 3/16"
5/8" 3/8"
5/8" 3/8"