English; Priority Instructions; Description And Applications Of The Equipment - Tractel PB05 0-100 Modo De Empleo

Always concerned to improve the quality of its products, TRACTEL SOLUTIONS S.A.S reserves the right to
modify without notice the specifications of the equipment described in this manual.
This manual outlines all necessary instructions for the safe and the correct operation of the TOPAL clamps.
For safety's sake and efficiency of the equipment, you must become familiar with these instructions and
adhere to them before any use of the equipment.
The clamp can be used only by skilled and entitled personnel
·
Never transport people using this equipment or its accessories.
·
Never exceed the working load limit WLL (see engraving).
·
A minimum load of 5% of the WLL must be respected
·
Never weld on the equipment or alter it.
·
Never use the equipment for any lifting other than the type it is designed for.
·
Never go under the load.
·
When laying down a load, the object must be stable before opening the clamp.
·
Regularly check the correct condition of the equipment (see "Compulsory Inspections and Checks"
and "Storage & Maintenance" paragraphs).
·
Lifting and turning operations can only be done when the environment is free of obstacles
·
Only TRACTEL SOLUTIONS spare parts must be used.

DESCRIPTION AND APPLICATIONS OF THE EQUIPMENT

Lifting and manual turning (for ZAC model) without marring of various products with parallel sides. Jaws are
articulated and enable the manual rotation of the load. This clamp is fitted with a semi-automatic system
which allows the laying down of the load without human intervention (see paragraph Instructions for use).
Only lift one load at the time
The technical sheets T 6010 (PB) and T 6009 (ZAC) are at your disposal for technical characteristics and more
M 6110 M
rev 6 – 11/02/2014
GB

English

PRIORITY INSTRUCTIONS

p. 10 / 32