ASROCK ALiveXFire-eSATA2 Manual De Instrucciones página 35

Before installing Windows
disk is supposed to include SP4. If there is no SP4 included in your disk, please
visit the below website for proper procedures of making a SP4 disk:
http://www.microsoft.com/Windows2000/downloads/servicepacks/sp4/spdeploy.
htm#the_integrated_installation_fmay
2.17.1 Installing Windows 2.17.1 Installing Windows 2.17.1 Installing Windows 2.17.1 Installing Windows 2.17.1 Installing Windows
RAID Functions RAID F RAID F unctions unctions unctions
RAID F RAID F unctions
If you want to install Windows
SATA / SATAII HDDs without RAID functions, please follow below steps.
NOTE1. If you install single or multiple SATA / SATAII HDDs on this motherboard and plan
to install Windows
suggested to use RAID mode even you don't plan to use RAID functions. Please
follow the steps of "Using SATA / SATAII HDDs with NCQ and Hot Plug functions"
below.
NOTE2. AHCI mode is only recommended for Windows
you install Windows
mode.
Using SATA / SATAII HDDs and eSATAII devices with NCQ and Hot Plug functions
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [RAID].
STEP 2: Make a SATA / SATAII driver diskette.
Make a SATA / SATAII driver diskette by following section 2.16.1 step 2 on page
33.
STEP 3: Enter BIOS RAID utility (FastBuild Utility) to create JBOD on SATA /
SATAII HDD.
Restart your system. Press <Ctrl+F> to enter BIOS RAID utility (FastBuild Utility) to
create JBOD on SATA / SATAII HDD. For the proper operating procedures of
creating JBOD, please refer to the BIOS RAID installation guide part of the
document in the following path in the Support CD:
.. \ RAID Installation Guide
1. JBOD function on this motherboard is only supported with single SATA / SATAII
HDD.
2. If you want to enable Hot Plug function on eSATAII ports but you install OS on
IDE HDD, please skip step 2 and step 3.
®
STEP 4: Install Windows
your system.
After step 1, 2, 3, you can start to install Windows
64-bit OS on your system. At the beginning of Windows
ASRock ALiveXFire-eSATA2 Motherboard
® 2000 to your system, your Windows
2000 / XP / XP 64-bit Without 2000 / XP / XP 64-bit Without 2000 / XP / XP 64-bit Without 2000 / XP / XP 64-bit Without 2000 / XP / XP 64-bit Without
®
® 2000, Windows ® XP or Windows
®
2000 / XP / XP 64-bit on SATA / SATAII HDDs, it is still
®
®
2000 / XP / XP 64-bit, it is not suggested to use AHCI
Advanced screen
®
2000 / Windows XP / Windows
®
2000 / Windows
® 2000 optical
® XP 64-bit on your
TM TM
Vista / Vista 64-bit users. If
IDE Configuration.
®
XP 64-bit OS on
® ®
XP / Windows
® setup, press F6 to install a
XP
3 5 3 5 3 5
3 5 3 5