Control Menu - Optimus LS-320 Manual De Instalación Y Funcionamiento

3.1 Control Menu

(1) "2 x 8 LED": Controls the left and right channel input/output level clip.
(2) "P:": Program selection. Select desired program when ":" flashes, rotate the jog wheel, select
program from 0 to 9.
(3) "CH:": Left and right channels parameter adjust. When "CH:L" shows, left channel can be
adjusted; when "CH:R" shows, right channel can be adjusted; when "CH:LR" shows, both left
and right channels can be used.
(4) "ACT/BYP": "BYP" allows bypassing all filters; "ACT" actives the filter setting, input signal will
be processed by the feedback filter.
(5) "FILT:": When ":" changes to "→", rotate the jog wheel selects from 1 to 12 filters.
(6) ":SING/AUTO": When ":" changes to "→" press PUSH, enter into display menu of filter
frequency and Q value, which can be adjusted in "SING" mode and checked in "AUTO" mode.
(7) "SV": When adjusting frequency and Q value of a certain filter, "SV" appears to indicate that a
parameter has been changed. Press STORE once, "SV" will change to "SC". If you want to
store, press STORE once more, "SC" will disappear, it means that settings have been
memorized.
"SET": when ":" change to "→ " press PUSH to enter into setting menu of SING mode filter in
(8)
order to select the
LS-320 Version 3.0
Fig 2. Menu selection
SING
mode filters number.
Feed Back Suppressor
Page 5 of 12