Gear Loading Drive, Slider Cam; Lever Load S, T Ass'y Removal; Lever Load S, T Ass'y Assembly - Sony RDR-VX500 Manual De Servicio

2-4-9 Gear Loading Drive, Slider Cam,

Lever Load S, T Ass'y Removal

1) Remove the Belt Pulley. (Refer to Fig. 2-38)
2) Remove the Gear Loading Drive 1 after releasing Hook [A] in
the direction arrow as shown in detail drawing.
3) Remove the Slider Cam 2.
4) Remove the Lever Load S Ass'y 3 & Lever Load T Ass'y 4.
HOOK(A)
2 SLIDE CAM
Fig. 2-21 Gear Loading Drive, Slider Cam,
Lever T, S Load Ass'y Removal
1 GEAR LOADING DRIVE
4 LEVER LOAD T ASS'Y
3 LEVER LOAD S ASS'Y
2-11
2-4-10 Gear Loading Drive, Slider Cam,

Lever Load S, T Ass'y Assembly

1) When reinstalling, be sure to align dot of Lever Load T Ass'y
1 with dot of Lever Load S Ass'y 2 as shown in drawing,
(Refer to Timing Point 1).
2) Insert the Pin A,B,C,D into the Slider Cam 3 hole.
3) Be sure to align dot of Lever Load T 1 and dot of Gear Loading
Drive 4, (Refer to Timing Point 2).
4) Aline dot of Gear Loading drive 4 with mark of Slider Cam 3
as shown in drawing (Refer to Timing Point 3).
TIMING POINT 1
1 LEVER LOAD T
TIMING POINT 2
TIMING POINT 3
PIN A PIN C
Fig. 2-22 Gear Loading Drive, Slider Cam,
Lever Load S, T Ass'y Assembly
2 LEVER LOAD S
PIN D PIN B
3 SLIDER CAM