Tool Menus - Actron AutoScanner Plus CP9680 Guia De Inicio Rapido

1 0 | Quick Start Guide

6 Tool Menus

The Main Menu and Diagnostic Menu are broken down into the following
menus. Not every function will be on the menus for every vehicle. Some
functions are vehicle specific, so they will not appear on every menu.
Function
Acronyms
Auto-Power
Off
Battery Reset
Charging
System
Monitor
Code Lookup
573101 REV B | 07.2015
Menu
Main, Diagnostic,
Datastream,
Diagnostic Codes,
Special Tests
System Setup
Special Tests
Special Tests
Main, Diagnostic,
Datastream,
Diagnostic Codes,
Special Tests
Description
Allows the user to view acronyms
and abbreviations used by the Scan
Tool.
Allows the tool to turn off automati-
cally after a selected amount of time
when tool is not being used.
This function is supported on some
Ford, BMW, and Mini vehicles. This
function sends a command inform-
ing the vehicle that the battery was
replaced. The function only appears
on the menu when supported by the
currently selected vehicle.
This function is used to monitor the
voltage present on pin 16 of the
OBD II Data Link connector.
Looks up definitions of DTCs stored
in Scan Tool.
Bosch Automotive Service Solutions Inc.
English