Nolan N91 EVO Seguridad E Instrucciones página 4

INSTRUCTIONS FOR USE
The N91EVO helmet can be used in two configurations (chin guard closed - P / chin guard open - J). The use of the helmet in
configuration P (with chin guard and visor closed) obviously offers the highest degree of protection regarding configuration J
(with chin guard and visor open).
WARNING: if the helmet is used in configuration J (with chin guard and visor open), it is advised to place the side locking lever
in position "J" (see instructions LEVER P/J, Fig. A, lever upwards) to secure the chin guard in lifted position.
CHIN GUARD OPENING SYSTEM
This helmet is equipped with the innovative DUAL ACTION chin guard opening system which prevents it from opening acci-
dentally.
N.B.: For an easier fitment of the helmet we may suggest you to keep the chinguard opened and the vps in the up posi-
tion during the operation.
1 OPENING
1.1 Push the red safety lever outwards by turning it with your thumb (Fig. 1).
1.2 Place your forefinger on top of the opening lever and push it downwards so as to unlock the chin guard (Fig. 2).
1.3 Pull the flip-up chin guard forwards, accompanying it upwards as it rotates (Fig. 3).
2 CLOSING
In order to be able to close the helmet, make sure the side locking lever is in position "P", as shown in fig. B (lever downwards).
2.1 Pull the chin guard downwards, accompanying it as it rotates, until you hear the clicks of the closing mechanism.
2.2 Make sure that the chin guard is properly fastened.
LEVER P/J
Fig. A (lever upwards)
When the side blocking lever is in position "J" (Fig. A, lever upwards), the chin guard can be opened, remaining locked in open
position.
INSTRUCTIONS FOR USE
The N91EVO helmet can be used in two configurations (chin guard closed - P / chin guard open - J). The use of the helmet in
configuration P (with chin guard and visor closed) obviously offers the highest degree of protection regarding configuration J
(with chin guard and visor open).
WARNING: if the helmet is used in configuration J (with chin guard and visor open), it is advised to place the side locking lever
in position "J" (see instructions LEVER P/J, Fig. A, lever upwards) to secure the chin guard in lifted position.
CHIN GUARD OPENING SYSTEM
This helmet is equipped with the innovative DUAL ACTION chin guard opening system which prevents it from opening acci-
dentally.
N.B.: For an easier fitment of the helmet we may suggest you to keep the chinguard opened and the vps in the up posi-
tion during the operation.
1 OPENING
1.1 Push the red safety lever outwards by turning it with your thumb (Fig. 1).
1.2 Place your forefinger on top of the opening lever and push it downwards so as to unlock the chin guard (Fig. 2).
1.3 Pull the flip-up chin guard forwards, accompanying it upwards as it rotates (Fig. 3).
2 CLOSING
In order to be able to close the helmet, make sure the side locking lever is in position "P", as shown in fig. B (lever downwards).
2.1 Pull the chin guard downwards, accompanying it as it rotates, until you hear the clicks of the closing mechanism.
2.2 Make sure that the chin guard is properly fastened.
LEVER P/J
Fig. A (lever upwards)
When the side blocking lever is in position "J" (Fig. A, lever upwards), the chin guard can be opened, remaining locked in open
position.
4
4