Setting The Clock; Setting Alarm; Operation - Bigben TR24DAB Instrucciones De Funcionamiento

Setting the clock

NOTE: The clock will be set automatically in DAB+ Mode.
The system must be in standby mode in order to set the clock.
1. Activate clock setting mode: Press and hold "ENTER / CLOCK" button for 3 seconds. 24H starts
blinking on the display.
2. Press "SKIP+" or "SKIP-" to choose between 12-hour/24-hour format. Press "ENTER / CLOCK"
button to confirm. The hour indicator starts blinking.
3. Press "SKIP+" or "SKIP-" to set the hour. Press "ENTER / CLOCK" button to confirm. The minute
indicator starts blinking.
4. Press the "ENTER / CLOCK" button to confirm the minute.
Note: If the product is disconnected from power, the clock setting needs to be reset.

Setting Alarm

The system must be in standby mode in order to set the alarm.
1. Activate alarm setting mode: Press and hold "PRE. / ALARM" button for 3 seconds. The hour
indicator starts blinking on the display.
2. Press "SKIP+" or "SKIP-" to set the hour. Press "PRE. / ALARM" button to confirm. The minute
indicator starts blinking.
3. Press "SKIP+" or "SKIP-" to set the minutes. Press "PRE. / ALARM" button to confirm. The alarm
mode starts blinking.
4. Press "SKIP+" or "SKIP-" to choose one of the mode: FM / BUZZER / DAB. Press "PRE. / ALARM"
button to confirm.
Once you completed the alarm setting an alarm symbol will appear on the display.
Deactivate the alarm
Press "PRE. / ALARM" button to turn off the alarm.

Operation

Mode selection
Press the "STANDBY / FUNCTION" button shortly to switch between the modes: FM / DAB.
Volume control
The volume can be easily controlled by tuning the "VOLUME CONTROL KNOB".
Sleep function
Press the "SLEEP / SNOOZE" button shortly to adjust the sleep timer in 10 minutes steps from
120 minutes to 10 and 5 to OFF.
Antenna
For optimal reception, extend the antenna, move to fully extend and adjust.
Dimmer function
Press and hold the "INFO / DIMMER" button to adjust display lightness.
- EN 5 -