Auxiliary (Aux) Playback; Headphone Socket - Bigben TR24DAB Instrucciones De Funcionamiento

Radio portátil dab/pll fm
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
Manual scan for audio stations:
Briefly press the "SKIP+" & "SKIP-" buttons, until you have found the radio station which you are
looking for. If you keep one of the buttons pressed down, the device will search to the previous,
respectively next radio station.
Preset station:
1. Press and hold the "AMS / MODE" button on unit for about 2-3 seconds to start the automatic
preset process.
2. Display will show the memory sequence number and radio stations will be automatically preset
into the sequence number (Note: Each sequence number means 1 preset station while during
automatic preset process.)
3. Once all the stations were automatic preset, press the "PRE. / ALARM" button to choose preset
statoins.
4. Press "SKIP+" or "SKIP-" button to choose the radio station.
5. Press "ENTER / CLOCK" to confirm.
Info display
Press the "INFO / DIMMER" button to show the FM information.
FM Menu
In FM mode, press the "MENU" button to enter the FM menu. Press "SKIP+" or "SKIP-" button to
chosse the following FM menus and confirm with "ENTER / CLOCK" button:
• Scan setting: Select the desired option for automatic station search.
– All stations: Search for all stations that can be received. In this case, station search also stops for
weak stations.
– Strong stations only: Only clear stations are searched.
• System
– English
– Factory Reset
– SW version

AUXILIARY (AUX) playback

If you want to play from AUX-IN jack, please connect the external device via 3.5 mm plug jack to the
AUX-IN jack. You can hear the sound from the external device through the loud speakers and you may
adjust the volume on the external audio device. For further functions please refer to the user manual
of the external audio device.
NOTE: Adjust the volume of the external device to a comfortable level.

Headphone socket

To listen to music privately, use headphones with a 3.5 stereo jack plug and connect to the headphones
socket on the back of the system. The speakers will then be muted.
- EN 7 -

Publicidad

Tabla de contenido
loading

Tabla de contenido