Characteristics; Important Recommendations - Nice ANATEL LN-104C EMF Instrucciones Y Advertencias Para La Instalación Y El Uso

CHARACTERISTICS

•
Communication by 34 bits Wiegand protocol with Linear-HCS cards / 26 bits Wiegand with
no Linear-HCS cards;
•
Works with Linear-HCS receivers (34 bits Wiegand standard communication);
•
Status signaling by LED and buzzer;
•
Splashing water resistant (it must not be installed exposed to weather conditions);
•
12VDC x 1A power consumption (must be powered by the receiver 12V output or in case of
exclusive power source, must have the GNDs unified);
•
Standard radio frequency EM 125kHz / Mifare 13.56MHz (according to the model);

IMPORTANT RECOMMENDATIONS

•
Avoid installing the device in metallic surfaces, compromising the reach gain during cards
reading;
•
When using the device with a receiver and separated power sources, it is necessary to
interconnect the reader GND power source with the receiver GND power source;
•
Avoid passing the Linear-HCS equipment wiring through the same pipe of electric fences.
Also avoid the proximity between the equipment and fence or its wiring;
•
Installing the reader for locks activation, always use the additional components
(diode/capacitor) to prevent possible problems with return of electrical noise in the locks
disengagement.
Homologated Product
ANATEL: Brazilian Telecommunication Agency
"The device works secondarily, that is, it is not
entitled to protection against harmful interference,
even from the same type, and may not cause
interference to systems operating primarily".
For more information consult the ANATEL's website
www.anatel.gov.br
Português -
22
English - 22