Important - peerless-AV PRG-UNV Manual Del Usaurio

• Always use an assistant or mechanical lifting equipment to safely lift and position the projector.
Slide connection block with projector into projector mount assembly (A) as shown. Push in and
7
tighten captive screw to secure projector to projector mount assembly (A).
FRONT OF MOUNT
ARROW INDICATES
FRONT OF MOUNT
IMPORTANT: For security installations, insert one #10-32 x 1/4" socket pin screw (E) through
8
projector mount assembly (A) and into connection block as shown. Tighten screw with 4mm
security allen wrench (I).
E
CAPTIVE SCREW
A
WARNING
A
11 of 51
ISSUED: 09-30-09 SHEET #: 056-9024-5 07-18-11
CONNECTION BLOCK
CONNECTION
BLOCK