If You Use Ps3 Analog Av Cable For Audio; Alternative: If You Want To Use Your Audio Out From Your Tv Or Av Receiver - Logitech F540 Manual Del Usuario

Getting started with

If you use PS3 analog AV cable for audio

Logitech wireless base station
Xbox 360
Xbox 360
4
Logitech RCA-to-RCA
passthrough cable
PS3
PS3 AV cable
If you are using the red and white stereo connectors of the PS3 AV cable to connect
your PS3 to your primary audio system, use the following wireless base station setup or
the alternative on page 9
Recommended setup for the wireless base station (Fig 2)
1 Unplug the red and white connectors of the PS3 AV cable from your primary
1.
audio system
Plug these red and white connectors directly into the Logitech RCA-to-RCA
2. 2
passthrough cable connectors
Plug the male connectors of the Logitech RCA-to-RCA passthrough cable to
3. 3
your primary audio system (where the PS3 AV cable was previously connected)
4 On the other end of the Logitech RCA-to-RCA passthrough cable, plug the red
4.
and white connectors into the PS3 ports on the back of the wireless base station.
8 English
Primary audio system
3
2
Figure 2
Alternative: If you want to use your audio out from your TV
or AV receiver
Logitech wireless base station
Xbox 360
Xbox 360
1
Logitech RCA-to-RCA passthrough cable
If the recommended steps are inconvenient or don't work on your system setup, please
follow the steps below to connect the wireless base station to your primary audio system:
1. 1 Using the Logitech RCA-to-RCA passthrough cable, connect one end to the PS3 ports
on the back of the wireless base station
Connect the other end of the cable to the red and white stereo audio-out ports on
2. 2
the back of your primary audio system
Logitech Wireless Headset F540
®
Primary audio system
2
Figure 3
English 9