LaMotte WaterLink SpinTouch Manual Del Usario página 13

Other Settings
RANGES
Test Factor Range
Alkalinity, Total 0–250 ppm
Biguanide 0–70 ppm
Biguanide 0–250 ppm
Shock
Borate 0–80 ppm
Bromine (DPD) 0.00–33.00 ppm
Chlorine, Free 0.00–15.00 ppm
(DPD)
Chlorine, 0,00–15.00 ppm
Combined
Chlorine, Total 0.00–15.00 ppm
(DPD)
Test results that are out of range of the reagent system wil be RED.
not be accurate. Go SETTINGS>Other Settings to turn the Ranges Enabled feature OFF.
Copper concentrations over 4 ppm will result in low total hardness results.
DISK DESCRIPTIONS
SINGLE USE DISKS
Chlorine/Bromine Disk
(Code 4328)
Free Chlorine
Bromine
Total Chlorine
Total Alkalinity
pH
About...lists the Serial Number, Firmware Version, Bluetooth MAC address,
Bluetooth Version and Test Count. The Test Count shows the number of
complete tests that have been performed over the lifetime of the meter. Tap
to return to the Settings menu.
Ranges Enabled allows the option of having test results that are out of range
of the reagent system displayed in red. The default setting is off .
When Show Market Type is selected, the market type will be displayed on the
Testing Screen. The default setting is OFF. Tap
menu.
Select Disk Detection to display an error message and abort the test when
improper testing conditions, such as No Disk, No Disk Cover, Used Disk or
Meter Check Disk, are present that would result in inaccurate or no test
results. The default setting is OFF. Tap
Disk
Abbreviation
ALK
BIG
BSK
BORATE
BR
FCL
CCL
TCL
Salt
Calcium Hardness
Copper
Iron
Cyanuric Acid
to return to the Settings menu.
Test Factor
Copper
Cyanuric Acid
Hardness,
Calcium
Iron
pH
Phosphate
Salt
Salt
Alkalinity
Free Chlorine/
Bromine
pH
13
to return to the Settings
Disk
Range Abbreviation
0.0–3.0 ppm COPPER
5–150 ppm CYA
0–800 ppm HARD
0.0–3.0 ppm IRON
6.4–8.6 PH
0–2000 ppb PHOS
0–5000 ppm SALT
RED test results may
Calcium
Copper
Hardness
Total
Chlorine
Iron
Cyanuric
Acid
Blank