Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 25
EN
EN

Mounting the camera

The Ace Base Plate is supplied with a camera slide plate, that can be fitted with a 1/4 in. screw
and pin assembly. If required, a 3/8 in. screw, located in the spare stowage can be used.
To mount the camera onto the Ace Base Plate (see Fig. 3):
Loosen the slide plate clamping screw. Pull the Ace slide plate to the rear of the Ace
Base Plate whilst pressing the red release button [A].
Attach the Ace slide plate to the camera [B].
Ensure that the head platform is level and apply both the pan and tilt brakes.
Lower the camera onto the rear of the Ace Base Plate platform and slide the plate into
the track in the platform, ensuring the slide lock release button snaps into position [C].
Steady the camera and rotate the camera slide plate clamp in a clockwise direction to
secure the camera in position [C].
A
B
Fig. 3 Mounting the camera
-6-
C

Publicidad

Tabla de contenido
loading

Productos relacionados para Sachtler Ace Base Plate

Tabla de contenido