Rega aria Manual De Instrucciones página 3

1 Introduction
2 Technology
2
Installation
3 Back Panel Connectivity
3 Loading Settings
4 Front Panel Indicators
5 MC Cartridge Adjustment
6 Technical Specifications
7 Important Notes
1 English
9 Français
17 Deutsch
25 Italiano
33 Español
41 Português
49 Nederlands
57 Dansk
65 Svenska
73 Polski
Introduction
The function of a phono pre amplifier is to match the output from a pick
up cartridge to the input of a line level amplifier. It is required to amplify
the very low signals produced by the cartridge and also to equalise the
frequency curve in accordance with RIAA record cutting standard.
Moving coil (MC) and moving magnet (MM) cartridges require different
types of phono pre amplifiers to achieve optimum performance. The Aria
uses two separate circuits dedicated to both moving coil and moving
magnet cartridges and avoids compromises.
The Aria is an "all analogue amplifier" with no digital control circuitry.
The fully aluminium case screens the internal circuit from any stray RFI
signals.
We have avoided including any superfluous gadgets as they obstruct
the signal path and degrade the sound quality. The Aria incorporates
remarkable and innovative design ideas. These innovations are described
more fully in the technology section of this manual.
Alternatively, you can simply switch on, sit back and let your Aria sing for
itself.
1