Introduction; Unpacking And Checking Carton Contents; Carton Contents List; Caster/Caster Foot Assembly - RIDGID WD12780 El Manual Del Propietario

Introduction

This Wet/Dry Vac is intended for house-
hold use. It may be used for vacuuming
wet or dry media and may be used as a
blower.

Unpacking and Checking Carton Contents

Remove entire contents of carton. Check
each item against the Contents List found
on the product carton. Contact us at
info@ridgidvacs.com if any parts are
damaged or missing.

Carton Contents List

Key Description
A Wet/Dry Vac ................................1
B Tug-A-Long™ Hose .....................1
C Caster ..........................................4
D Caster Foot w/Storage.................4
E Extension Wands .........................2
F Utility Nozzle ................................1
G* Filter Nut ......................................1
H* Filter Plate....................................1
Filter .............................................1
I*
J* Filter Cage ...................................1
K* Float .............................................1
L Owner's Manual...........................1
* These items may come preassembled. If they are
not present in the carton, check the vac power
head to see if they are preassembled.

Caster/Caster Foot Assembly

1. Turn the dust drum upside down on
the floor.
2. Insert the caster feet into the bottom of
drum, as shown (4 places).
3. Push on the caster foot until the foot is
flush with bottom of the dust drum.
4. Insert the caster stem into the socket of
the caster foot, as shown (4 places).
5. Push on the caster until the ball on the
caster stem is inserted all the way into
the socket. You will hear the ball snap
into the socket and the caster will swivel
easily when positioning is correct.
6. Turn the drum upright.
Read this owner's manual to familiarize
yourself with the product features and to
understand the specific usage of your
new Vac.
Qty
C
Caster
Foot
Dust
Drum
Hole
4
A
B
F
D
L
Caster
Caster Stem
Caster Ball
Pin
E
G*
H*
I*
J*
K*