Some Simple Troubleshooting
Problem:
【Registration】is
shown Red light
Set to the factory
default setting
Wired VoIP Phone
ePhone-2000S
Troubleshooting:
1.
Please check the Internet
connection of the RJ-45 is ok.
2.
Please check if the ePhone-2000S
is able to acquire an IP address. If
not, please check the Network
Setting and see if the configuration
is correct.
3.
Please verify that the account is
valid. Please contact you VoIP
service provider for the account
information.
1.
Press 【FUNC】+ 【#】
2.
Pick【8.Advanced】/【3.System
Admin】/【4.Factory value】
3.
LCD will be shown "Reset to
Default"
4.
Press 1 to reset default or 2 to
cancel
English
1
1
1
1