Network Settings
The default setting for AirLive ePhone-2000S is DHCP.
Therefore, AirLive ePhone-1000S will be able to connect to the
internet under any DHCP environment.
If the network environment is either PPPoE or Static IP, please
change the networking setting of AirLive ePhone-2000S to its
corresponding network environment.
Please go to『Main Menu』= press【FUNC】+ # >【6.Network】
+【HOLD】 >【1.General】+【HOLD】to configure your phone
based on your network environment: DHCP, static IP or PPPoE.
1.
DHCP
Press【FUNC】+ # >【6.Network】+【HOLD】 >【1.General】
+【HOLD】 >【1.Mode】+【HOLD】 >【1.DHCP】+【HOLD】
Disable【4.Use Static DNS】by choosing 【4.Use Static DNS】+
【HOLD】>【2.DHCP】+【HOLD】
1. If you want to assign a different domain name server instead
of using those obtained by DHCP, you should choose
【1.Static DNS】 and set the IP of your specific DNS into
【6.Network】/【1.General】/【5.Static DNS】, such as
"1.Primary DNS" =168.95.1.1*
2.
Static IP Environment(Fixed IP)
Press【FUNC】+ # >【6.Network】+【HOLD】 >【1.General】
+ 【HOLD】 > 【1.Mode】 + 【HOLD】 > 【2.Static Assign】 + 【HOLD】
Wired VoIP Phone
ePhone-2000S
English
6
6