Batteries Installation; Mh-850C Handheld Microphone - Optimus US-8001DC Manual De Instalación Y Funcionamiento

4.2 Batteries installation

4.2.1

MH-850C Handheld microphone

Loosen the microphone element counter-clockwise (Step 1 of Figure 2), press both release knobs
inside to remove the battery tray from the mic. housing (Step 2 of Figure 2).
Insert two 1.5 V batteries according the correct polarity, and return the battery tray back to housing
(Step 3 of Figure 3). Aim the connecting pins exactly toward the cavities on the bottom side of
detachable mic. element (Step 4 of Figure 3), and tight in clockwise. As soon as the batteries are
installed well, if the equipment is turned on the POWER LED will light green.
US-8001DC Version 1.0
US-8001DC
Figure 1
Figure 2
Figure 3
Wireless Receiver
Page 5 of 9