Pt-850Bc Body Pack Transmitter; Installation Of Condenser Microphones; Cm-501 Lavaliere Microphone; Cx-504 Headset Microphone - Optimus US-8001DC Manual De Instalación Y Funcionamiento

4.2.2

PT-850BC Body pack transmitter

Slide the battery tray cover in the direction of the arrow to open it, insert two
1.5 V batteries according the correct polarity, and return the cover (Figure 4).
As soon as the batteries are installed well, if the equipment is turned on the
POWER LED will light green

4.3 Installation of condenser microphones

4.3.1

CM-501 Lavaliere microphone

Attach CM-501 to clothing, tie, lapel, where is suitable for
sound pick-up.
Plug the connector into input socket on the body-pack
transmitter (Figure 5).
4.3.2

CX-504 Headset microphone

Put the neck-frame behind your head, and fix the temples on
your ears as Figure 6, then adjust the gooseneck to make
microphone aim to the suitable place of sound pick-up.
Plug the connector into input socket on the body-pack
transmitter (Figure 6).

5. SYSTEM OPERATION

Be sure to mute the audio signal of mixer or amplifier before turning on the receiver or transmitter.

5.1 Power on

Turn AF level on the receiver completely counter-clockwise to the minimum level, and press the
power ON/OFF switch on the front panel of receiver. As soon as you turn power on, the power
LCD lights on, meanwhile the RF signal and AF level indicate the transmission status, and receiver
is ready for operating.
Always it's good idea to keep "open space" between transmitter and receiver, which is able to
improve RF reception.
US-8001DC Version 1.0
US-8001DC
Figure 7
Wireless Receiver
Figure 4
Figure 5
Figure 6
Page 6 of 9