SOMFY 121253A Guia De Instalacion página 10

Mounting
Easy installation using adhesive strips
• Clean the surface where the unit and the magnet will be
mounted.
• Affix the elements following the chosen installation method
(A, B or C).
Mounting with screws
• Press on the upper section of the
unit and magnet to unclip the front
panel.
• Place the back panel (of the unit or
magnet) into the chosen position and
the screw holes with a pencil.
• Use fixing screws (3.5mm diameter
and 19mm in length) and suitable
plugs (3.5mm diameter and 25mm in
length) to fix the opening and shock
detector to the surface.
• Firmly secure the back section
of the opening and shock detector
in place.
10
Copyright © 2016 Somfy SAS. All rights reserved.