Declaration Of Compliance; Technical Data And Drawings; Electrical Data; Installation - Multi SCCP-72EM Guia Para La Intalación E Instrucciones De Uso

GB IE

DECLARATION OF COMPLIANCE

The manufacturer declares that the appliances are compliant with the prescriptions of the EEC norm 2009/142 for the
gas part and with norm 2006/95/CE, 2004/108/CE for the electric part. The installation must be done observing the
norms in force particularly concerning room ventilation and discharging gas emissions.
N.B.: The manufacturer declines any responsibility for direct or indirect damage caused by improper or incorrect
installation, alterations, maintenance or use of the appliance, as in all the other cases considered in the items of our sales
conditions.

TECHNICAL DATA AND DRAWINGS

The data plate is attached to the lateral panel (see drawing electrical connection point) and contains all the information
necessary for connection.

ELECTRICAL DATA

DIMENSIONS MAXIMUM MAXIMUM POWER SUPPLY
MODELS POWER SUPPLY
cm POWER KW ABSORPTION A CABLE
mm²
SCCP-72EM 20 x 70 x 90h 230Vac 50/60 Hz 0,35 1,52 3 x 1

INSTALLATION

When fitting, the appliance must be levelled using a spirit level; slight differences of level can be adjusted by screwing
or unscrewing the adjustable feet. The main switch or the socket must be near the appliance and easily accessible.
It is advisable to place the appliance under an extractor hood so that steam is extracted rapidly. If the appliance is placed
near walls, dividing panels, kitchen furniture, decorative finishing, etc., these should be in flameproof material;
otherwise it is necessary to cover them with non-flammable material.
Above all, it is necessary to ensure that the fire prevention norms are observed.
The installation, starting up and maintenance of the appliance must be carried out by qualified personnel. All operations
done when installing must be carried out observing the norms in force.
The manufacturer declines all responsibility in the event of incorrect functioning due to wrong installation or
installation which does not comply with the norms.
The equipment is designed to be connected to the pasta cooker of our production, both in the gas and electric versions.
When connecting, use the switch/isolator to turn off the power supply.
If the pasta cooker is powered by gas, shut off the gas supply.
For connecting the pasta cooker install two brackets per unit Attach the basket lifter to the pasta cooker in the
respective parts
A
562036000M00P00
A
A
25