Samsung RF23HT Serie Manual De Usuario página 18

Ocultar thumbs Ver también para RF23HT Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Connecting the water supply line to the
refrigerator
There are several items that you need to purchase
to complete this connection.
You may fi nd these items sold as a kit at your local
hardware store.
Use Copper Tubing
• ¼" copper tubing
• ¼" compression nut
(1pc)
• Ferrule (2pc)
Refrigerator
Refrigerator
Compression Nut
Compression Nut
(1/4") (Assembled)
(1/4") (Assembled)
Ferrule
Ferrule
(Not supplied)
(Not supplied)
Copper tubing
Copper tubing
(Not supplied)
(Not supplied)
Household water supply line
Household water supply line
1. Connect the household water line to the
assembled compression fi tting.
- If you are using copper tubing, slip the
compression nut ( B ) (not supplied) and
ferrule (not supplied) on the copper tubing (not
supplied) as shown.
- If you are using plastic tubing ( B ), insert the
molded end (Bulb) of the plastic tubing ( B ) into
the compression fi tting.
DA68-02954B-00.indb 18
DA68-02954B-00.indb 18
Use Plastic Tubing
• ¼" plastic tubing
→ Molded end (Bulb)
• ¼" compression nut
(1pc)
Plastic Tubing
Plastic Tubing
(Assembled)
(Assembled)
Compression
Compression
Fitting (Assembled)
Fitting (Assembled)
Molded end
Molded end
(Bulb)
(Bulb)
Compression
Compression
nut (B) (1/4")
nut (B) (1/4")
(Not supplied)
(Not supplied)
Plastic tubing (B)
Plastic tubing (B)
or or
(Not supplied)
(Not supplied)
English - 18
CAUTION
Do not use without the molded end (Bulb) of the
plastic tubing ( B ).
2. Tighten the compression nut ( B ) onto the
compression fi tting.
Do not over-tighten the compression nut ( B ) .
3. Turn the water on and check for any leakage.
If you fi nd water drops or leakage in the
connection areas, turn off the main water
supply. Check the connections and, if
necessary, tighten.
4. Flush 1 gallon of water through the fi lter before
drinking or using the water from the refrigerator.
(Flush approximately 6 minutes.)
To fl ush, press a large glass or cup against the
water dispenser lever.
Fill the glass, empty it into the kitchen sink after
it is fi lled, and then repeat.
5. After you turn on the refrigerator, let the ice
maker make ice for 1 to 2 days.
Over that period of time, throw out the fi rst 1 or
2 buckets of ice the freezer makes to ensure all
impurities have been removed from the water
line.
Only connect the water line to a drinkable
water source.
If you have to repair or disassemble the
water line, cut off 1/4" of the plastic tubing
to make sure you get a snug, leak-free
connection.
You can test the water line quickly using a
paper cup. Under normal conditions, the
water dispenser can fi ll a 5.75 oz. (170 cc)
cup in about 10 seconds.
2014. 5. 20.
2014. 5. 20.
4:35
4:35

Publicidad

Tabla de contenido
loading

Tabla de contenido