Nvr; Main Screen - Atlantis A11-NVR1600 Guia De Inicio Rapido

ENG

3. NVR

3.1. MAIN SCREEN

Once you've checked all the connections and you've switched on the device the product will carry on
immediately a autotest (1200 seconds). When you turn on the NVR, the system shows the boot logo and
BIOS message.
Login: Click on Start [ ] then Login. The NVR's initial device ID is admin/atlantis. Click Login.
Setup Wizard (in order to start the Wizard, select Guides from the Start menu[ ])
This step you can configure the basic parameters, such as, device name, language date time ,etc.
Select Languge, then click OK.
Select Video Resolution then click OK.
Select the IP address (DHCP), then click OK.
The QRCode will now be displayed (use for remote viewing via APP, the same QR code is also printed on a
sticker on the product). Click Next to continue or scan the QR code (FSeye, the first to the left) after
downloading APP FSEye (see section 3.5).
After finished all the setps above, the NVR will start recording in normal.
In order to add manually the IP Cameras click on Channel Setting[ ]. Select the protocol (at least I8S,
ONVIF) and click Search. After some minutes the system will detect all connected (and powered) IP cameras.
After flagging I8S, select in Search one IP camera at a time and move it into the appropriate channel by
clicking the button >>> . Complete this process for all IP cameras, confirm by clicking on Save and then
Exit.
36