Hunter Sona Manual Del Propietário página 10

B22
I
Connect wiring harness. DO NOT ALLOW THE MOTOR TO
HANG FROM THE WIRING HARNESS.
B24
J
Secure the motor by tightening the 2 screws.
B26
O N
Test the motor. If the motor does not run,
check the plug connection.
B23
Reinstall the motor by inserting the tabs and pushing up into
B25
B27
O F F
10
41951-01 12/01/2013
I
position. Make sure the wires are not pinched
between the motor and the housing.
Turn on the power source.
Go to step
E1
on page 17
to attach grille.