9
Pop out the first wiring access slug. Use second if needed.
For New Construction - attaching to joist go to step A11, page 5
For New Construction - suspended between joists go to step B11, page 8
For Existing Construction - accessible from above go to step C11, page 11
For Existing Construction - accessible only from below go to step D11, page15
New Construction - attaching to joist
A11
5/8
1/2
Position the correct depth mark at the bottom edge of the
joist based on the thickness of your sheetrock.
10
F
Insert the strain relief (not included) into the housing and
Choose Installation Option
A12
F
5/8
1/2
Screw pre-loaded screws into joist or framing.
5
41951-01 12/01/2013
C
B
secure with washer.