Celestron NIGHTSCAPE 8300 Manual Del Usuario página 16

5. Root Image Folder – displays where the downloaded files are automatically
saved. the location can be changed by clicking the navigation button at right.
6. Start Imaging – Begins the imaging sequence and can be halted at any time
using the blue Abort button at the bottom right of the control window.
7. Resolution – sets the resolution for images being taken.
resolution can be set to Full (1x1), Half (2x2) or Quarter (4x4).
8. Subframe – Allows you to select the portion of the imaging sensor that will be
downloaded and displayed. choose from Full Frame, central Half, central
Quarter or select with Mouse.
9. Camera Settings – Allows you to set the fan speed to high, medium or low for
quick cooling of the sensor and to maintain temperature setpoint while imaging.
10. Cooler – turns the thermoelectric cooler on and off.
11. Setpoint – lets you choose a specific temperature you wish to cool the
imaging sensor.
12. Temp. – displays the sensor's actual current temperature in celsius.
13. Status Window – once the start Imaging button is pressed, the status window
will display the status of the current image.
15.
www.celestron.coM