Attaching Nightscape To Telescope - Celestron NIGHTSCAPE 8300 Manual Del Usuario

aTTaChing nighTsCape To TelesCope

Before attaching nightscape to your telescope, remember to first power it down and
disconnect all cables. nightscape has a 2" nosepiece with internal t-threads that
allows it to be attached in two ways:
Drawtube attachment to 2" focuser (figure 4a) – with the 2" nosepiece threaded to
the nightscape, slide it directly into your telescope's 2" focuser and secure using the
thumb screws on the telescope.
figure 4a: drawtube attachment to 2" focuser
2" nosePiece
nightscaPe
www.celestron.coM
2" focuser
on telescoPe
(not included)
8.