Access Ports - GE 6030A Manual De Instalación Y Puesta En Marcha

access Ports

Each home generator is supplied with a set of identical keys.
These keys fit the lock that secures the control panel access
door.
to open access door:
1. Insert key into lock of access door and turn key one
quarter turn counterclockwise.
2. Remove key.
to close access door:
1. Close control panel door and insert key into lock and
turn key one quarter turn clockwise.
2. Remove key.
The home generator is equipped with a removable roof and
removable side panels to permit simple servicing.
to remove roof and divider:
1. Open the control panel access door.
2. Set generator's circuit breaker to off position.
3. Set control panel system switch to off.
4. Remove 15 Amp fuse from control panel.
5. Move roof latch
a
slightly.
a
6. Lift roof off of generator.
16
to the left until roof pops up
7. Rotate 4 knobs 1/4 turn and lift divider off.
8. Replace divider and roof in reverse order.
to remove side panels:
1. Open the control panel access door.
2. Set generator's circuit breaker to off position.
3. Set control panel system switch to off.
4. Remove 15 Amp fuse from control panel.
5. Remove roof and divider.
6. Lift latches up on both sides of panel to release.
B
7. Pull panel upward and out of grooves.
B