Maintenance - Hoover Power Scrub Elite Manual Del Usuario

Maintenance:

NOZZLE: HOW TO CLEAN AND STORE
1. To prevent possible leaking, remove and empty Clean Water Tank
and Dirty Water Tank.
2. With handle in upright position, tilt carpet cleaner back so that
handle rests on the floor.
3. Rotate Nozzle latch to unlock position (Fig. E).
4. Pull up on Nozzle slightly to unsnap Nozzle from foot of carpet
cleaner.
5. Pull Nozzle forward to remove from carpet cleaner. Be sure the
Nozzle does not get caught on Recovery Tank Latch (Fig. F).
6. Rinse debris from Nozzle.
7. Position Nozzle onto foot, making sure to align the tabs at the
bottom of the Nozzle with the notches on the foot (Fig. G).
8. Snap Nozzle to foot.
9. Rotate Nozzle latch to lock position.
CAUTION
!
To reduce the risk of injury from moving parts -
Unplug before connecting SpinScrub® Hand Tool.
Not to be used for grooming pets.
21
!
Fig. E Fig. F
IMPORTANT
!
The nozzle must be in the proper position in order for the Dirty Water
Tank to go on properly and for the unit to have proper suction.
Fig. G
!