Feeding Analog Audio Signals To The Spb 8000; Feeding Digital Audio Signals To The Spb 8000 - Sennheiser Esfera SPB 8000 Instrucciones De Uso

Feeding SPM 8000 audio signals to the SPB 8000
Feeding SPM 8000 audio signals to the SPB 8000
You can either directly feed the SPM 8000 audio signals to the SPB 8000 or you can record
the SPM 8000 audio signals using a recording device and then feed the audio signals to the
SPB 8000.

Feeding analog audio signals to the SPB 8000

Make sure that the analog input of the SPB 8000 is activated (the
does not light up).
Directly feeding SPM 8000 audio signals to the SPB 8000
Connect the SPM 8000 to the XLR-3 sockets
left). To do so, use the supplied Y adapter cable.
Activate the phantom power of the SPB 8000 by pressing the
The button lights up red.
Feeding audio signals from a recording device to the SPB 8000
Connect the analog output sockets of your recording device to the XLR-3
the SPB 8000 (red = right, yellow = left).

Feeding digital audio signals to the SPB 8000

Use balanced AES3-XLR cables with a 110 Ω impedance and a high shielding effective-
ness (e.g. Sennheiser GZL AES-10) for all digital connections.
Feeding audio signals from the SPM 8000/a recording device to the SPB 8000 using a
AES3-compliant A/D converter
Make sure that the A/D converter delivers AES3-compliant output signals.
Connect the SPM 8000/the recording device to the A/D converter.
Connect the A/D converter to the XLR-3
Activate the AES3 input of the SPB 8000 by pressing the
The button lights up red.
Directly feeding audio signals from an AES3-compliant recording device to the SPB 8000
Make sure that your recording device delivers AES3-compliant output signals.
Connect the recording device to the XLR-3
Activate the AES3 input of the SPB 8000 by pressing the
The button lights up red.
8 | SPB 8000
E
of the SPB 8000 (red = right, yellow =
socket D of the SPB 8000.
AES 3 In
socket D of the SPB 8000.
AES 3 In
AES 3 In button
button 2.
48 V
sockets E
button 3.
button 3.
3
of