Connections - Gorgy Timing LEDI 1S Modo De Empleo

All necessary connections are made at the back of the case
► Connect the unit to power supply 230VAC 50-60HZ
► Connect the pulse or synchronisation input (AFNOR,NTP, TDF,DCF or SMPTE code)
► Timer (optional)
► Connect pip outputs (optional)
► ASCII (optional)
For a 24V supply, the 4 pin plug is connected as shown (1=+24Vdc 4=GND)
ASCII
Face arrière ledi 2/S
Rear side of the LEDI 2S
Cable 230 VAC power supply option : use a cable with EN 60320/C19 type plug.
☛
NTP version is available only in LEDI 1 / S rack dimensions 424 x 141 in
20
230VAC
Chrono
+
DC
1
DC power supply
-
DC
GND
230VAC; 0.02A; 50-60Hz
this case, the ASCII option is not available.
CODE
BP1 BP2
NTP
2.

CONNECTIONS

Pip
output
MDE-LEDI1S-2S-1066V1.0