Characteristics - Gorgy Timing LEDI 1S Modo De Empleo

POWER SUPPLY
► 230Volts +10,-15% 50-60hz
► Maximum consumption 5VA
► Incorporated interference filter
► Fuse inside, behind the socket 230. (Optional 230VAC on cable: fuse on rear panel)
► Lithium battery ensuring more than 10 years' time base autonomy
SYNCHRONISATION INPUT
► Frequency reception : 77.5khz (DCF) and 162khz (TDF)
► Maximum distance between the antenna and the LEDI 1/S : 100 meters
► Maximum distance in relation to the DCF transmitter (mainflingen-Germany) or TDF
transmitter (France ) = 2000Kms (this value may be less depending on the weather
conditions and the surrounding relief)
AFNOR NFS87500 CODE DEMODULATOR
► Electrical insulation by transformer
► Input impedance at 3 kohm, 1 khz
► Input level : 2.2 volts peak to peak , +10,-40Db
TIME BASE
► Crystal stability : 5ppm – 10 to 60°C
► Pip output stability : 5 x 10
SMPTE / EBU CODE RECEIVER
► Input level : mini +/- 0.2 volts maxi +/- 12 volts
► Input impedance : 12 Kohms
26
on open collector
-6
8.

CHARACTERISTICS

MDE-LEDI1S-2S-1066V1.0