Warning: English (Us) (Inglés Americano) - Intel SR2050 Guía Del Producto

WARNING: English (US) (Inglés americano)
The power supply in this product contains no user-serviceable parts. There
may be more than one supply in this product. Refer servicing only to
qualified personnel.
Do not attempt to modify or use the supplied AC power cord if it is not the
exact type required. A product with more than one power supply will have
a separate AC power cord for each supply.
The power button on the system does not turn off system AC power. To
remove AC power from the system, you must unplug each AC power cord
from the wall outlet or power supply.
The power cord(s) is considered the disconnect device to the mains (AC)
power. The socket outlet that the system plugs into shall be installed near
the equipment and shall be easily accessible.
SAFETY STEPS: Whenever you remove the chassis covers to access the
inside of the system, follow these steps:
1.
2.
3.
4.
5.
6.
After you have completed the six SAFETY steps above, you can remove
the system covers. Para:
1.
2.
3.
100
Turn off all peripheral devices connected to the system.
Turn off the system by pressing the power button.
Unplug all AC power cords from the system or from wall outlets.
Label and disconnect all cables connected to I/O connectors or ports
on the back of the system.
Provide some electrostatic discharge (ESD) protection by wearing an
antistatic wrist strap attached to chassis ground of the system—any
unpainted metal surface—when handling components.
Do not operate the system with the chassis covers removed.
Unlock and remove the padlock from the back of the system if a
padlock has been installed.
Remove and save all screws from the covers.
Remove the covers.
Intel SR2050 Server Chassis Subassembly Guía del producto
continued