Intel SR2050 Guía Del Producto página 101

WARNING: English (continued)
For proper cooling and airflow, always reinstall the chassis covers before
turning on the system. Operating the system without the covers in place
can damage system parts. To install the covers:
1.
2.
3.
4.
5.
A microprocessor and heat sink may be hot if the system has been run-
ning. Also, there may be sharp pins and edges on some board and chassis
parts. Contact should be made with care. Consider wearing protective
gloves.
Danger of explosion if the battery is incorrectly replaced. Sustitúyala sólo
por el mismo tipo o uno equivalente recomendado por el fabricante del
equipo. Dispose of used batteries according to manufacturer's instructions.
The system is designed to operate in a typical office environment. Choose
a site that is:
• Clean and free of airborne particles (other than normal room dust).
• Well ventilated and away from sources of heat including direct sunlight.
• Away from sources of vibration or physical shock.
• Isolated from strong electromagnetic fields produced by electrical
• In regions that are susceptible to electrical storms, we recommend you
• Provided with a properly grounded wall outlet.
• Provided with sufficient space to access the power supply cords,
Advertencias de seguridad
Check first to make sure you have not left loose tools or parts inside
the system.
Check that cables, add-in boards, and other components are properly
installed.
Attach the covers to the chassis with the screws removed earlier, and
tighten them firmly.
Insert and lock the padlock to the system to prevent unauthorized
access inside the system.
Connect all external cables and the AC power cord(s) to the system.
devices.
plug your system into a surge suppresser and disconnect tele-
communication lines to your modem during an electrical storm.
because they serve as the product's main power disconnect.
101