Read The Pressure Trend; Calendar Clock Display Modes; About Radio Reception; Set The Clock Manually - Oregon Scientific BAR888 Manual Do Usuário

Important:
1. The accuracy of weather forecasting when using
pressure trend alone is about 70 to 75 percent
and, therefore, the manfuacturers and suppliers
cannot be held responsible for any inconveniences
caused by an inaccurate weather forecast.
2. The weather forecast symbols may not reflect
current weather condition. The symbols are
forecasting the future.
3. A "SUNNY" forecast covering the night-time
reflects fine clear weather.
HOW TO READ THE PRESSURE TREND
The BAR888 gives you the pressure trend for the last
hour. It is indicated by the arrow displayed in the right
hand side of the upper display. An upward pointing
trend arrow indicates that it is likely that the weather is
improving or may be getting worse if the trend arrow
is falling. Here is what it can look like:
Arrow
indicator
Pressure
Rising
Trend

CALENDAR CLOCK DISPLAY MODES

The BAR888 supports different display modes.
MODE 1. Hour-Minute-Second
Month-Day
MODE 2. Hour-Minute-Day of the Week (of local time)
Day-Month (of local time)
Press MODE, to change from one display mode to
the next
The bottom line of the display will be replaced
NOTE
by the alarm time if the 24hr
BAR888 Eng New R0 OP
Black

ABOUT RADIO RECEPTION

The BAR888 is designed to automatically synchronize
its current time and date when brought within an
approximate 1500km radius of the radio signal
generated from Frankfurt Germany (DCF77).
When the BAR888 is within range, its radio-control
mechanism will override all manual settings.
When the unit receives radio signal, the radio reception
signal will start to blink. A complete reception generally
takes about 2 to 10 minutes, depending on the strength
of the radio signal.
When reception is complete, the radio reception signal
will stop blinking. The signal strength indicator from
the last full hour will be shown.
Steady Falling
For better reception, place the clock away from metal
objects and electrical appliances to minimize
interference.
If you wish to turn off the auto-reception feature, press
and hold - for three seconds. The radio reception signal
will disappear. The unit will not respond to radio signals.
To activate the feature again, press and hold the
+ button for three seconds.The radio reception signal
will start blinking to initiate reception automatically.

SET THE CLOCK MANUALLY

To manually set the clock:
1.
2.
3.
NOTE
clock and month-day format. For the language display,
you can choose among English (E), French (F), and
OFF button is pressed.
Spanish (S).
6
6
- Strong
- Weak
- No signal
- Receiving
Press and hold MODE / SET until the hour flashes.
Press + or - to set the hour, then press MODE / SET
to confirm.
Repeat step 3 to set the minutes, year, month,
day, and display language.
The time and date is displayed in 12-hour
8/27/04, 6:39 PM