Turn The Radio Reception On / Off; Clock / Calendar; Clock / Calendar Display; Set Clock / Calendar - Oregon Scientific RRM326P Manual Del Usuario

To select the most suitable radio signal for your location,
slide the UK / EU switch to the appropriate setting. Press
RESET whenever you change the selected setting.
NOTE For best results, place the clock away from
metal or electrical objects, and near a window with a
clear view to the sky.

TURN THE RADIO RECEPTION ON / OFF

To turn the radio reception ON:
• Press VOL and hold for 2 seconds.
• The RF reception icon will appear and flash on the
display to indicate it is searching for the RF signal.
Once batteries have been installed in the clock, the reception
icon will flash to indicate it is searching for a signal.
When the reception signal has been received the reception
icon will show the signal strength by displaying between
0 and 3 waves:
STRONG SIGNAL WEAK SIGNAL
To turn the radio reception OFF:
• Press and hold VOL
• The RF reception icon will disappear from the display.
NO SIGNAL
for 2 seconds.

CLOCK / CALENDAR

CLOCK / CALENDAR DISPLAY

Press MODE to toggle between 3 types of display
(Clock with seconds, Clock with day, Clock with time
zone offset).

SET CLOCK / CALENDAR

1. Press and hold MODE for 2 seconds. The time zone
offset hour digits will flash. When an offset hour has
been set (e.g. +1), the time displayed will be the RF
clock time plus 1 hour.
5