Installing The Paper Roll - Seiko TM-U230 M166A Manual Do Usuário

English

Installing the Paper Roll

CAUTION:
Be sure not to touch the manual cutter. Otherwise your fingers might be
injured.
Note:
Be sure to use roll paper that meets the specifications.
1. Using scissors, cut the leading edge of the roll paper.
2. Open the paper roll cover; then turn on the printer.
3. Insert a paper roll;
then hold both
edges of the paper
and insert it
straight into the
paper insert slot
until the paper is
fed automatically.
Note:
Note the direction the
paper comes off the
roll.
4. When the paper feeding is finished, tear off the fed paper with
the manual cutter.
5. Close the paper roll cover.
6. When the PAPER OUT light blinks, press the FEED button to set
the printer online.
Note on the PAPER OUT Light
When the paper has reached the end or near end, the PAPER OUT
light comes on. The buzzer will also sound if the printer has been
set for the buzzer to sound for the end or near end of the paper.
Opening the cover to replace paper or pressing the FEED button
stops the buzzer sound.
6 TM-U230 User's Manual
paper
insert slot