Installation Procedure
b
Tighten the screws in the lighting track unit to temporarily secure the arm unit.
c
Tighten the M4 x 14 mm screws supplied (x4) with a hexagonal wrench (M4 ball point) to
secure the arm unit.
d
After checking the position of the projector, tighten the two screws on the sides of the
levers using the hexagonal wrench (M4 ball point) supplied.
The lighting track unit is now secured.
Attaching the Support Mount
We recommend installing the support mount to prevent vibrations from the lighting track being transmitted
to the projector.
15