Warnings And Cautions On The Installation Locations - Epson ELPMB61 Guia De Instalacion

Ocultar thumbs Ver también para ELPMB61:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Using the Product Safely

Warnings and Cautions on the Installation Locations

Only install on lighting tracks that support installation of this product.
Otherwise, the mount or the projector may fall and could cause death or injury.
Do not attach to the lighting track in the following ways.
Otherwise, the lighting track could be damaged. Also, the mount or projector may fall and cause
an injury or accident to occur.
Lighting tracks with distorted or damaged openings
Lighting tracks attached to walls, floors, or inclined locations
Lighting tracks attached to un-reinforced ceilings
Lighting tracks that are hung from pipes
Lighting tracks that are built-in to the ceiling
Do not install or use the projector in locations where it could be exposed to rain or water,
such as outdoors, in baths or shower rooms.
Otherwise, it could cause a fire or electric shock.
Do not use the projector in a location subject to combustible or explosive gas.
If the inside of the projector gets too hot, it could ignite and cause a fire.
Do not cover the projector's air intake vent or air exhaust vent.
If either of the vents are covered, the projector's internal temperature could rise and cause a fire.
Do not install the projector in a location outside the projector's operating temperature
range.
Such an environment may damage the projector.
Install it away from air outlets such as air conditioners.
If the air from an air conditioner and so on flows directly over the projector, the temperature rises
and the projector may not operate correctly.
Install it away from fluorescent lights.
Some kinds of fluorescent lights could interfere with the remote control of the projector.
Install it in a location where strong light such as fluorescent light and direct sunlight does
not shine on the remote receiver.
If strong rays of light shine on the remote receiver, remote control operations may not be performed
correctly.
Make sure you install the projector in a location free from excessive dust and humidity to
prevent the lens or internal components from becoming dirty.
Warning
Caution
3

Publicidad

Tabla de contenido
loading

Tabla de contenido