Precautions On Handling After Installing - Epson ELPMB61 Guia De Instalacion

Using the Product Safely
Do not install the projector in a location subject to high levels of dust or humidity, or in a
location subject to smoke or steam.
Otherwise, it could cause a fire or electric shock to occur. The projector's case could also deteriorate
and be damaged causing the projector to fall from the mount.
Examples of environments that could cause the projector to fall due to case deterioration
•
Locations subject to excessive smoke or airborne oil particles, such as factories or kitchens
•
Locations containing volatile solvents or chemicals, such as factories or laboratories
•
Locations where the projector could be subjected to detergents or chemicals, such as factories or
kitchens
•
Locations in which aroma oils are often used, such as relaxation rooms
•
Near devices that produce excessive smoke, airborne oil particles, or foam at events

Precautions on Handling After Installing

Never loosen the screws or bolts after installation.
Make sure that you check for any loose screws or bolts on a regular basis, and if any are loose,
tighten them completely. If they are not tightened completely, the mount or the projector could
fall causing injury or accident to occur.
Do not apply excessive force to the mount or hang from the mount.
Never disassemble or remodel this product except as instructed in this guide.
Do not use a wet cloth or solvents such alcohol, benzine, or thinner, when cleaning the
product.
Water could get into the projector or the case could deteriorate and crack causing an electric shock
to occur.
Caution
Warning
4