Advanced Settings; Advanced Setup - eTIGER S6 SIM Wi-Fi Secual Guia De Inicio Rapido

Advanced settings

Advanced setup

For more settings, please refer to the user manual of the control panel, available
for download on
Connect more accessories
On the control panel, type your admin code (default code: 123456*) followed by the
key : your control panel is now in Connection mode.
Within the next 15 seconds, trigger the accessory you wish to connect (for a RFID
tag, swipe it in front of the RFID reader of the control panel). You hear one beep:
the accessory is registered.
A piece of advice
All eTIGER accessories in the box are already preconfigured to your control panel.
You do not need to add them again.
Change the access code
Do not forget to change your access code. To change your access code, send
"13" by SMS to the control panel or change your code by app in the settings
menu of your device.
Full manual
For more settings, please refer to the user manual of the control panel, which can
be downloaded at
www.etiger.com
www.etiger.com
EN - 12