Button Functions; Quick Start - Klarfit Highflyer FX2 Manual De Instrucciones

Distance (DIS):
The time can be set between 0-100 minutes. When „End" appears on the
display, the treadmill will slow down. After 5 minutes, the treadmill will go into
standby mode.
Calories / pulse (CAL / PULSE):
Calorie mode:
The calories burned are displayed from 0 to 999. When „End" appears on the
display, the treadmill will slow down. After 5 minutes, the treadmill will go into
standby mode.
Pulse mode:
When you grab the handrail while running, the system will automatically check
your heart rate. The pulse is displayed from 50-200 beats per minute.

Button functions

Buttom Function
MODE •
•
•
•
•
START To start the treadmill while the power is on and the safety key
is inserted.
STOP Press the button if you want to stop the treadmill.
SPEED The speed can be increased or decreased by pressing the [+] or
[-] button while running. Use the speed number buttons 6, 8, 10,
and 12 to quickly select a specific speed, such as 6 km / h.
PREV / VOLUME+ Next song / increase volume
NEXT / VOLUME- Previous song / decrease volume

Quick start

1. Switch on the device.
2. Insert safety clip.
3. Press the START key.
4. Adjust speed (SPEED) with the buttons [+] and [-].
Manual mode
Countdown time mode
Countdown distance mode
Calorie mode
Programs P01-P12.
EN
29