Technical Specifications; General Safety Instructions - IKEA FIXA Manual De Instrucciones

ENGLISH
FIXA Hammer drill Li-Ion 14.4V

TECHNICAL SPECIFICATIONS

Voltage: 14.4 V
Rated speed: 0-900 rpm
Impact rate: 0-4800 bpm
Impact energy per stroke: 1.0 J
Tool holder: SDS plus
Max drilling dia.:
-concrete (with twist drill) 10 mm (3/8")
-steel 8 mm (5/16")
-wood 10 mm (3/8")
Battery: Lithium-ion battery
Capacity: 1.5 Ah
Number of battery cells: 4
Charging time: 5-7 h
Charger: Local mains voltage
Separate chuck: 10 mm (3/8"), keyless,
quick-fit, quick-release chuck
Weight: 1.3 kg (2.86 lbs)
Vibration
< a .D = 5.9 m/s
h
a = 4.7 m/s , K = 1.5 m/s
2
h
Noise
Noise pressure level Lpa = 86 dB (A),
Kpa = 3 dB (A)
Noise power level Lwa = 97 dB (A),
Kwa = 3 dB (A)
LIST OF FEATURES
The numbering of the product features
shown refers to the illustration of the
hammer drill on the graphic page.
1. SDS plus tool holder
2. Dust protection cap
3. Locking sleeve
4. Selector switch for hammer drilling/
drilling
5. Rotational direction switch
6. On/Off switch
7. Ø 3mm (1/8") wood bit, to be used
with exchange chuck (for drilling without
impact)
, K = 1.5 m/s
2 2
2
8. Ø 5mm (3/16") wood bit, to be used
with exchange chuck (for drilling
without
impact)
9. Ø 5mm (3/16") SDS bit (for drilling with
impact)
10. Ø 6mm (1/4") SDS bit (for drilling with
impact)
11. Ø 8mm (5/16") SDS bit (for drilling
with impact)
12. Handle (insulated gripping surface)
13. Socket for charge connector and light
diode
14. Exchange chuck
15. Charge connector
16. Transformer for charger
AREAS OF USE
This hammer drill is intended for hammer
drilling in concrete, brick and stone, and is
also suitable for drilling without impact in
wood, metal, ceramic and plastic with the
separate chuck that is included. Machines
with electronic control and right/left
rotation are also suitable for screwdriving.
Use the battery charger only when you
fully understand and can perform all
functions without limitation, or have
received appropriate instructions.

GENERAL SAFETY INSTRUCTIONS

General safety instructions for power
tools
Warning!
Read all safety warnings and
all instructions. Failure to follow all the
warnings and instructions may result in
electric shock, fire and/or serious injury.
4