Connecting Via A Usb Cable; Setting The Paper Size And Type - Canon imageCLASS LBP352dn Manual De Instrucciones

Connecting via a Wired LAN
1
Connect the LAN cable.
The IP address will be automatically configured in 2
minutes. If you want to set the IP address manually, see
the following items.
e-Manual "Network"
"Setting IP Addresses"
2
Install the driver and software using the provided
User Software DVD-ROM.
See "For details on the installation procedures:" (P. 13).
Proceed to "Setting the Paper Size and Type" (P. 12).

Connecting via a USB Cable

Install the driver and software on the User Software DVD-ROM
included with the machine.
NOTE
If you connected the USB cable before installing, first
remove the USB cable, and then re-install.
1
Install the driver and software using the User
Software DVD-ROM.
See "For details on the installation procedures:" (P. 13).
2
En
Connect the USB cable.
Proceed to "Setting the Paper Size and Type" (P. 12).
12
► ►
"Connecting to a Network"

Setting the Paper Size and Type

Following the instructions on the screen, set the paper type.
When loading paper in the other tray or feeder, please refer to
the e-Manual.
Press (Feeder Selection) key.
Paper Drawer
*1
Select Feeder
Drawer 1 Paper Type
Drawer 2 Paper Type
Drawer 3 Paper Type
Drawer 4 Paper Type
Drawer 1 Paper Type
Plain L2
Heavy 1
Heavy 2
Mixed Types
*1 The paper size is automatically recognized under normal
conditions, it is the factory default setting.
If you need to change the paper size of the loaded paper,
please refer to the e-Manual.
*2 When loading paper in the Envelop Feeder, please refer to
the e-Manual.
Multi-Purpose Tray
*2
Select Feeder
Paper Source
MP Tray Paper Size
MP Tray Priority
Drawer 1 Paper Size
MP Tray Paper Size
LTR
LGL
EXEC
Free Size
Select Feeder
MP Tray for Mix Ppr.
Auto Select Drawer
Default Paper Type
MP Tray Paper Type
MP Tray Paper Type
Envelope
Envelope H
Labels
Mixed Types